If you have ADHD, you’re a parent of someone with ADHD, or you know someone with ADHD, you will probably have noticed behaviour that seems to connect to the condition. Moving furniture around is one of those behavioural quirks that many people with ADHD find familiar and a pretty harmless quirk at that. Let’s take a look at why rearranging your bedroom or your home might be something you enjoy doing if you have ADHD. What is ADHD?ADHD is the abbreviation for attention deficit hyperactivity disorder. It is a neurodevelopmental disorder that is often diagnosed in childhood but can often be missed (especially for girls) and can also be diagnosed in adulthood. Attention deficit hyperactivity disorder can take three different forms, each of which has its own classic ADHD symptoms. The symptoms can look different in children than in an adult. Predominately hyperactive-impulsiveThis is the type of attention deficit hyperactivity disorder that people imagine when they hear the name. The symptoms in children include:
Predominately inattentiveThis cluster of symptoms used to be called ADD but it is now included in the ADHD umbrella. One of the reasons why girls tend to not be diagnosed as often as children is that they are more likely to have predominately inattentive attention deficit hyperactivity disorder and this is less likely to be picked up on in school. The symptoms in children include:
Combined presentationSome children don’t fall neatly into predominately hyperactive-impulsive or predominately inattentive and they may have symptoms that fit into both. In this case, they would be diagnosed as having a combined presentation of attention deficit hyperactivity disorder. Adult ADHDFor adults who didn’t have an attention deficit hyperactivity disorder diagnosis in childhood, the presentation may look quite different. This is partly because behaviours are naturally going to be different for a child compared to an adult and partly because many undiagnosed children with ADHD symptoms learn to “mask” them. In other words, they find methods to reduce their symptoms on their own so that they fit into society a little more easily. Symptoms of ADHD in adults include:
The ADHD experienceThe ADHD experience can differ greatly from one person to the next and not everyone with ADHD will present in the same way. One person can have a cluster of symptoms that have little to no overlap with the symptoms of someone else with ADHD, especially for adults who have learnt their own techniques for masking. Attention deficit hyperactivity disorder can have a powerful impact on someone’s life. In childhood, it can interfere with the child being able to succeed at school, which can have a lasting effect on adulthood. It can also cause difficulties with making friends and being able to function socially which can be very upsetting and also cause problems that last throughout life. People with ADHD may experience other conditions alongside it, although they don’t always. In children, this could be an anxiety disorder, depression, dyspraxia, autism spectrum disorder, Tourettes, and more. In adults, depression is common, as is bipolar disorder, personality disorders, and obsessive-compulsive disorder (OCD). Let’s focus on bipolar disorder for a second because that can often be confused for ADHD. Bipolar disorder vs ADHDSomeone with bipolar disorder used to be labelled “manic depressive”. It is a type of depression where the person will cycle through periods of depressive lows and periods of manic highs. The manic periods of bipolar disorder can happen anywhere between a few times a year to once every few weeks. When someone is experiencing mania, their symptoms can look very similar to ADHD. For example, they might be restless and have excess energy. They might also be inattentive, easily distracted, and have problems focusing on tasks. They are also likely to talk excessively and interrupt other people and have behavioural and emotional instability. The overlap in symptoms between ADHD and bipolar disorder can cause the two conditions to be confused with each other but there are some key differences. Remember that ADHD is a neurodevelopmental disorder. This means that it is a lifelong disorder that results from a difference in the person’s brain. As a result, ADHD symptoms are chronic. Treatments like medication and therapy can help people with ADHD to manage their symptoms but they are always present. This can also be seen in the fact that, although not everyone with ADHD receives their diagnosis when they are a child, the symptoms will have started in childhood. Bipolar disorder, on the other hand, is a mood disorder, not a neurodevelopmental one. People with bipolar disorder aren’t born with a different brain in the same way that a child with ADHD will have been. Instead, it is a condition that develops later. Most people’s symptoms don’t start until their late teens or early adulthood. This difference can also be seen in the way that bipolar disorder symptoms cycle. A period of mania may last a week or so, but once the person has emerged from it, the manic symptoms have gone. What causes ADHD?We have touched on this already but ADHD is a condition that someone is born with. There is definitely a genetic component to ADHD, so someone with close family members who have the condition will be more likely to have ADHD themselves. There is also a difference in both brain structure and function. The brain of someone with ADHD will be physically different from someone without ADHD. For example, some areas of the brain may be smaller or larger. The way the brain functions may also be different. For example, the balance of chemicals in the brain may be different in someone with ADHD compared to people without the condition. People who are born prematurely or with low birth weight, people born with brain damage, and people with epilepsy are also more likely to develop attention deficit hyperactivity disorder. There are common misconceptions about the causes of ADHD. That for example, if a child may eat too much sugar, this could cause the condition, or if they were to watch too much TV. This isn’t the case, however. ADHD is something that you are born with and doesn’t tend to develop at a later age as it would if it were triggered by these types of environmental causes. How is ADHD treated?Getting officially diagnosed with ADHD is the first step to receiving the appropriate treatment and it is a long process that can be quite anxiety-provoking for some. But it is important that the diagnosis is done properly so that you or your child can access everything that they need to help them. And to have something to explain why they might be having trouble or feeling the way that they are. For a child, the process involves assessments from a variety of different people. This can include reports from their parents, a specialist, and their teacher. Having a range of people describe the symptoms that the child is experiencing is important because one of the key features of ADHD is that it happens everywhere. So, for example, symptoms won’t just be present when the child is in their house but they will also show up at school and in every other area of their life. Their teacher will almost certainly have noticed if they struggle in the classroom with their work or with making friends. Most schools will also have plans in place to support children with ADHD that your teacher will be able to access once your child has their diagnosis. In adults, the symptoms need to have begun in childhood for a diagnosis of ADHD. They also must not be easily explained by another condition, such as bipolar or anxiety disorder, and they need to interfere with your everyday life. For example, they might interfere with your ability to perform well at work, finish a university course, or with relationships. Parents of people with ADHD and adults with ADHD may have had to search for an answer for so much time that finally hearing that they do have the condition can be freeing in and of itself. Knowing that there is a reason why they don’t feel “normal” and that it isn’t their fault can be a powerful moment. Once someone has been diagnosed with ADHD then they will be able to access the right treatment for them. The best treatment can vary between individuals and it can take a while to find out what works for each person. MedicationsMedication is a common treatment for ADHD and there are a few different medications that can help. The most common medications for ADHD are actually stimulants. This may seem backwards because, for many people, they want to feel less stimulated. And in people without ADHD, these stimulants might well mimic some of the symptoms of ADHD. But for people with the condition, the stimulants work in the opposite way. They can help to reduce impulsivity and hyperactivity and they can help the person with ADHD to focus. TherapiesTherapy is another common treatment for ADHD. Different forms of therapy will work better for different people. Cognitive behavioural therapy (CBT) can help people to manage the link between their thoughts and their behaviour, psychoeducational can help people to understand ADHD and how it affects them, family and parent education can help the entire family understand how best to support the person with ADHD. Different therapies might be helpful at different times in people’s lives so many people chop and change with which ones they engage with. With all of that being said, people with ADHD aren’t bound by their condition. Most people with ADHD are able to live a happy and healthy life, full of fun and ambition just like anybody else. Especially once they find a treatment that suits them. Why do people with ADHD like to rearrange their rooms?Now we have taken some time to explain what ADHD is, you might be wondering what all of that has to do with moving furniture around frequently. Of course, not everyone with ADHD will enjoy rearranging their room. As we have seen, the experience of one person with ADHD can often be very different from the experience of the next person with ADHD. With that being said, you might have seen a lot of new blog posts pop up discussing moving furniture around as a characteristic of ADHD. And you might feel compelled to write a post about it yourself if it is something that you experience. We have discussed how ADHD can lead people to have difficulty with focusing. This might seem like it is at odds with being able to plan out and successfully rearrange a room but, in fact, this type of focus is quite common in people with ADHD. If the task is something the person enjoys and they are motivated enough, people with ADHD will often hyperfocus on it. This means that their focus is completely on that task, to the expense of all others, and the focus will last until the task is fully completed, sometimes without taking a break. The psychological benefits of rearranging a roomAnd moving furniture around can absolutely be something to enjoy. We know that rearranging furniture can have powerful psychological and emotional effects that can help people to boost their mood and gain a sense of control. In our modern world, it can be difficult to point to concrete examples of having completed a task successfully. Something that is completed on a computer might have a little tick next to it but a tick is only something you can see in your head. Neither is a “like” on a post on a social media website that you have decided to sit down and write. These aren’t things that you can touch or hold in your hand. Moving a room around, on the other hand, is a lot more than just an idea in your head. It is an achievement that is truly concrete. You have physically moved the furniture and you can walk around and see and touch everything that you have done. This concrete satisfaction is something that can help to give people a sense of real achievement. And having a physical effect on the environment around you can also help you to feel that you are effective and competent. Rearranging the space around you can also help to change your perspective. Sometimes when we are stuck in a rut, it can be difficult to find the right way to lead ourselves out of it. But shifting our perspective by changing the space we are in can help to change our thought process entirely. Rearranging a room is also a great avenue for being creative. It is a chance to put our own stamp on our environment in a way that reflects our sense of style and aesthetic. A creative outlet is important for a lot of people and, again, moving a room around is concrete creativity that is impossible not to notice. If someone might tend to struggle with feeling out of control, whether that is due to hyperactivity or circumstances in their past and current life, rearranging a room can help them to re-establish that sense of control by being the master of their own space. You can also think of rearranging a room as a form of mindfulness. With mindfulness, the goal is to focus on the present moment and everything that is happening around you. Unlike other therapies, you don’t for example write down how you feel. The goal is to not focus on your internal thoughts and to instead focus on what your senses are experiencing. Focusing on the goal of rearranging your environment can be the answer to achieving mindfulness in some circumstances because you are forced to focus only on what is happening around you. But this isn’t just limited to just your room! Many living rooms and dining areas have furniture (for example a display cabinet) that can also be rearranged. Promoting that sensation of mindfulness and control of your environment. Taking on this smaller task of rearranging a display cabinet for example, can still allow you take back some piece of mind and control. Even when deciding how to fill your display cabinet, do you go with curio’s or opt for more sentimental pieces such as family photos. These actions can help even though they seem small. What to do if your family member won’t stop rearranging their roomUp until now, you might have thought of this rearranging behaviour as something that the person needs to take a break from because it isn’t “normal”. And, sure, for a lot of people, it might seem unusual for someone to move their room around on a regular basis. But, in a lot of cases, trying to get them to stop may not be the right answer. Rearranging a bedroom or other area is something that won’t do any harm to anyone. It usually doesn’t even cost any money. And, as we have seen, it can have positive psychological benefits, especially for someone with ADHD. If rearranging their space is something that gives them joy and a sense of control, then most of the time, it’s best to sit back and let them enjoy it. You could try to get involved and make suggestions but if they have a strong aesthetic that they are trying to seek, you might well get dismissed! Otherwise, the answer is to let them be and be happy for them that they have found a creative outlet that makes them happy. If your family member is a child, you might like to help them out with ideas, while still letting them take the lead when it comes to design. Under a certain age, everyone has trouble planning out a task to its completion, and the last thing you want is for them to get frustrated or upset that they can’t create the vision they have in their head. Helping out by lifting their desk and moving it for them or bundling up the bits that are getting in the way can do wonders for helping them to finish what they have started. Giving them a sense of control over their bedroom can be a great way of supporting them in finding a fun way of engaging their focus and exploring their creativity. The bottom lineADHD (attention deficit hyperactivity disorder) can affect people of any age but the symptoms tend to start in childhood. It is a neurodevelopmental condition that arises because of differences in the way the brain is structured and how it functions. Someone with ADHD might have symptoms related to hyperactivity, such as being impulsive, or they might have symptoms related to being inattentive, such as being likely to forget things. In other news, if you or someone you know with ADHD likes to rearrange their space on a regular basis and you’re wondering why the answer is that it is a healthy way of exploring their creativity and gaining a sense of control over their environment. Moving furniture around gives a physical sense of achievement and it can even help with mindfulness. The article ADHD & Rearranging Furniture was first published to https://www.adetailedpalette.com/ “ADHD & Rearranging Furniture”> via Tumblr ADHD & Rearranging Furniture
0 Comments
Many places around the world have implemented block paving. After all, it makes for a strong covering for both civilian and commercial-related projects. But like many similar surfaces, block paving driveways accumulate unpleasing marks after some time. These will ruin a smooth and satisfying driveway, changing the driving experience for many. Oil is a stubborn liquid and often the culprit for most driveway blemishes. However, motor oil seeps into the gaps of bricks and slabs due to frequent spills. These leave marks that are quite difficult to take care of. Read on to learn how to get oil off block paving driveway. PreventionWhile spills cannot be completely avoided, steps may be taken to reduce the number of marks left on the driveway. Pay close attention to your car to check if oil leaks from underneath. It will not hurt to place some cardboard to reduce stains. Use Some SawdustAs funny as it sounds, sawdust may help you with your oil problem. It helps lessen oil by absorbing some, which will make the cleanup process a lot easier. If you do not have any sawdust, some cat litter or a sweeping compound can help. Make sure to clean up the mess afterward to return your driveway to its best state. Get Some WaterWhile this may seem like stating the obvious, cleaning the affected area with some water will help remove the oil that seeped onto the driveway. Rinsing allows your other cleaning materials to fully discard any residue left in the area. If you are unsure of using a bucket, try using a garden hose. If you have access to a higher-powered hose, it might help things run faster on your end. You can also combine hot water with a detergent scrub. Start by heating water and mixing it with the detergent. Pour down the mixture onto the affected area, scrubbing away the stains throughout the process. Use a hose to continue the momentum of the water. Repeat these steps until you can no longer see stains or as deemed necessary. Oil stains can be nasty, so some patience is needed! Do not forget to wear protective equipment, or at least some goggles and gloves. Employ the Help of SodaYour favorite soda has uses outside the kitchen, and the driveway is one place to use its help. Grab a bottle of your favorite carbonated soft drink and pour some on the stained area. Leave it alone for a day or so before washing away the mixture with a garden hose or a bucket of warm water. The water will help rinse the area. Detergent May Be the Way to Go.You probably have some laundry detergent lying around the house. If other chemicals like soft drinks or even good old water have not worked, then it might be time to use another tried and tested chemical. Try out a baking soda or vinegar solution at first. If this does not work, then bring out the laundry detergent. Apply the detergent onto the site of the oil spill on the pavement. Wait for at least thirty minutes, then sprinkle a small amount of powdered detergent if the stain is still visible. Add about a quarter cup of hot water to make a solution. After that, thoroughly scrub the spill with a strong, thick brush. Do not do anything else until the day after. If the stain remains visible, repeat the process until you are satisfied. Get Some Heavy-Hitting ChemicalsThere will be some cases where everyday household items will not be enough to rid yourself of the problem. These instances call for more drastic solutions, such as an engine cleaning fluid. Remember that such substances are toxic and dangerous due to their flammability. Be sure to apply them in a small portion of the driveway first to prevent excessive damage. You can also create what is called a poultice mixture. This combination is usually effective for smaller stains or oil spills that have just happened. This reaction is that the poultice absorbs the oil, especially on concrete surfaces. There are conditions to check for before a poultice mixture can be applied. First, ensure that a seal does not coat the driveway. Otherwise, the poultice mixture might destroy it. Then, mix an absorbent substance like sawdust or baking soda with acetone. If acetone is not available, xylene will also do. Mix these ingredients thoroughly. The result should be a thick paste that can be applied to surfaces. Together, the ingredients should remove any recent oil stains. Put some over the stain, at around a quarter of an inch thick. Then, cover the area with an adhesive to keep it in place. Stepping on it with your foot will also help get the mixture onto other areas. Check back after a day. After twenty-four hours or more, the mixture can be removed from the affected area. Gently peel off the adhesive and scrape away the mixture with a sweeper. Remove it and dispose of it properly. Finally, wash the area with some water (a bucket will do, but a heavy-powered hose will help lessen the waiting time). Remember to notify other household members of the chemicals as they can have unpleasant odors. Use Microbial Cleansers from the StoreMicrobial cleansers are available in most household stores. They are usually made from biodegradable material, are less harsh on the nose, and are even more eco-friendly. Check with your local hardware store if they have some available. A gallon should last you multiple clean-ups. They are effective against oil spills due to the microorganisms in the solution. They do these without causing any toxic chemical reactions. Ensure to check for a seal of approval from authorities and validate the product with the store before purchasing. Some stains can just be plain stubborn. These might be a bit hopeless, and you will probably spend more trying to remove them than just replacing the area altogether. So you can ask for help from an expert on construction or look up the process of block paving yourself. The important thing is to remain safe and cautious as you do these solutions. Now that you have the knowledge of removing unsightly oil stains from your block paving driveway why not jump into some of our other articles including 15 Reasons New Tarmac Drive Can Still Be Soft Even After Installation and The Best Driveway Materials for Sloped Driveway! The post How to Get Oil Off Block Paving Driveway was first seen on A Detailed Palette Interior design “How to Get Oil Off Block Paving Driveway”> via Tumblr How to Get Oil Off Block Paving Driveway So, you have a nice piece of property, but the downside is that it has a sloping driveway. Don’t worry as it’s not the end of the world. Although a sloped driveway presents a significant challenge, you still have a handful of options. In this article, you will learn about the things that you need to consider and your options for the best driveway material for a sloped driveway. Key ConsiderationBefore this article covers different kinds of viable materials for a sloped driveway, you should know what factors you should seriously consider. DrainageWhen it comes to the key considerations, drainage is perhaps the most crucial one to think about. The reason for this is that run-off water can cause a lot of problems that will affect the driveway condition. Pooling water will not only slowly erode your driveway, but it can be a huge hazard when it freezes. Your driveway should have drainage that is directed to the sides and channeled towards a drain. SafetySince the driveway is on a slope, the car must have enough traction with the driveway to prevent slipping-related problems. Generally, the steeper the slope, the more traction you will need. AestheticsUsually, a driveway is one of the first things that people will see when visiting your home. Hence, it’s essential that your driveway look good. If you choose the wrong material in relation to the situation, it may immediately start to develop cracks, holes, or other aesthetic-related issues. Hence, you’ll likely be going to re-do the entire thing, which will cost you more time and money. Thus, it’s crucial that you do it right the first time. So What Is The Best Driveway Materials?GravelAt first glance, gravel may be the worst option if you have a sloping driveway. However, with a bit of know-how, it is possible. In most cases, the best way of doing it is to use gravel stones of different sizes. You start with the large stones as your bottom layer. Then, the stones gradually become smaller and smaller as you go up. Using this approach, your driveway will have excellent drainage. You can also use a plastic grid construction, which compartmentalizes the gravel and helps the gravel to stay in place. Keep in mind that although gravel may work, but it’s only applicable if the slope is gentle. If the slope is steep, you may have to look for another option as the gravel can easily slide down and pile at the bottom area. The excellent thing about gravel is that it’s readily available, economical, and easy to install. Hence, it’s not also something you’d want to discount immediately. Asphalt Or ConcreteConcrete or asphalt is another option open to you if you have a sloped driveway. Both materials are similar in a way that they both require a similar base. Keep in mind that these materials require good drainage. The good thing about asphalt concrete is that you can use them in most sloping driveways. As long as the material doesn’t slip while it is curing, these materials are applicable. Even for the challenging driveways, a contractor can employ strategies to make these materials work. For example, the contractor can split the driveways into multiple sections, which can help tackle the sloping problem. You need to keep a few things in mind if you choose asphalt or concrete. Both materials tend to become slippery. Such an instance is especially true if there are dips in the driveway that water can then pool. Ice sheets running down the driveway are also another potential problem. Paving StonesPaving stones is perhaps one of the most excellent options for a sloped driveway. However, they can be costly compared to other materials. Paving stones solves a lot of the problems that are related to the sloping issue. For example, paving stones does not slip, assuming the contractor is experienced. And, if you choose a textured paving stone, you’ll have the grip that you need and reduce the slipping hazard significantly. The only real issue with paving stone is that it’s just costlier. It’s also labor-intensive and takes longer to install compared to other materials. Resin-Bound SurfacingIf you are just looking for the shortest answer for the question of “what is the best material for a sloped driveway?” then perhaps the best answer is the resin-bound surfacing. This kind of material is a mixture of resin and stone. Generally, an aggregate stone is first set on the bottom-most layer as this will provide excellent drainage. Then an asphalt layer is set on top of that. Finally, the resin-bound surfacing material is pressed on top of the asphalt layer. With this setup, you have a driveway with excellent drainage and grip. The beauty of resin-bound driveways is that it’s usually porous. This allows water to seep through the material, preventing ice formation. Typically, this freezing and melting process will cause most driveways material to erode. But thanks to the resin, the sub-based is protected from this erosion process. If you add drainage to the edges, your driveway can effectively deter water-build up even if the driveway is very steep. Another excellent thing about resin-bound driveways is that you have the option of choosing the aggregate size. If you need more grip because the driveway is steep, you can go for a larger aggregate size. The construction process of resin-bound surfacing driveways has to be laid continuously. As a result, there will be no cracking. No cracks will mean it won’t be prone to slipping, and it will also be aesthetically pleasing. Lastly, resin-bound surfacing scores high in terms of longevity. Generally, it would last for around 30 years. Yes, this type of driveway can be costly. However, if you consider how long they will last, this type of driveway is actually very cost-efficient. Wrapping It All UpHaving a driveway that is sloped presents a couple of challenges. As a result, you have fewer options when it comes to driveway material. Thankfully, you still have a couple of options, such as gravel, asphalt, concrete, paving stones, or resin-bound surfacing. Keep in mind that each material has its own sets of pros and cons. Hence, it’s up to you to decide which one will work best for your situation. While you’re here why not read some other articles we have produced such as 15 Reasons New Tarmac Drive Can Still Be Soft Even After Installation and Popular Types of Plumbing Pipes and Their Uses! The Best Driveway Materials for Sloped Driveway Find more on: https://adetailedpalette.com “The Best Driveway Materials for Sloped Driveway”> via Tumblr The Best Driveway Materials for Sloped Driveway Tarmac is a popular surface for driveways, playgrounds, and other recreational areas, but many people don’t know it can still be soft even after installation. The tarmac surface can get soft due to moisture beneath the surface, making it difficult for people enjoying the recreational area to run and play on it. Below are some reasons why the new tarmac drive is still soft even after being installed tightly. Tarmac Is a Porous Surface and Can Easily Absorb WaterTarmac, especially untreated tarmac, is a very porous surface. This makes it highly permeable and easily absorbs water from the ground or above. The installation process of tarmac will seal some of these pores, but not all of them, depending on the quality of the job. Inadequate sealing means that some areas underneath the tarmac will absorb water, leading to a soft surface. Tarmac Needs Time to Harden and the Final Appearance May VaryTarmac is not a hard surface when it is first installed. It needs time to cure and harden properly, taking up to 6 weeks. During this time, the surface may still be soft as the tarmac continues to cure and solidify. The final appearance of the tarmac surface may also vary from one area to another due to variations in the installation process. This can also lead to softer areas than others even after installation. Tarmac Is Prone to Frost Heave When WetOne of the main reasons tarmac surfaces can get soft is frost heave. When the surface gets wet, it can freeze and expand, pushing the tarmac upwards. This can create a soft surface as well as damage the tarmac. Frost heave is more common in areas that have colder temperatures and is more likely to occur during the winter months. Tarmac Can Settle Over TimeAs with any surface, tarmac can also settle over time. This is usually due to people’s weight or vehicles traveling over it. The settling process can cause the surface to become uneven, leading to softer areas than others. While tarmac surfaces may still be soft after installation, the following are ways to help reduce this issue:
Tarmac Compaction During InstallationA tarmac contractor will usually compact the surface during installation. This helps create a more stable and sturdy foundation for the tarmac. However, it can also make some areas harder than others due to variations in the compaction process. This is especially true if an experienced operator does not use the correct technique. Tarmac Sub-base PreparationIf the sub-base is not made up of good quality material such as crushed rock or limestone, it might start to erode after a while. This can cause drainage problems and make the surface uneven and unstable. The tarmac may also start to crack and split due to the movement of the underlying soil. The choice of gravel used for the sub-base can also affect this issue, especially if it is too small and in bad condition. Failing to prepare the sub-base correctly can lead to the tarmac being soft in some areas, which can pose risks to running or playing on it. Improper InstallationThe improper installation refers to any errors in preparing and installing a new tarmac surface. This includes using unsuitable machinery or not using enough compaction during installation. It may also mean some mistakes in completing other work, such as laying cables or ducts underneath the site, which would add extra weight to the area already saturated with water from rain or snowmelt. Quality of TarmacThe quality of the tarmac used can also affect its strength and stability. If the tarmac is too soft or has not been graded properly, it can easily break down and deform. Some areas underneath may still be able to absorb water even after installation, which will weaken the surface’s quality and make it more susceptible to damage from vehicles or people. This is why it’s recommended to invest in a good-quality tarmac for recreational areas such as playgrounds and sports courts instead of using a cheaper option that might not last very long and needs frequent repairs and resurfacing. Rock Salt DamageOne common cause of a weak system is salt damage on asphalt surfaces. Winter maintenance involves plowing and spreading salt to keep ice from a dangerous surface. While it’s necessary to prevent people from slipping on the ice, the salt will also build up over time, eat away at any protective coatings, and stop pores in the asphalt from absorbing water. This leads to small areas underneath becoming soft and thin spots where vehicles can wear through. Tarmac Construction Underneath Water Mains or PipesIn densely populated urban areas, roads are often crowned so that rainwater drains off them into gutters and sewers instead of pooling in puddles near a shop entrance or a house driveway. This means that there might be construction underneath water mains or pipes that become part of the road surface. If the tarmac is not properly sealed, water will get in and soften the surface over time. Poor DrainageIf water cannot drain away quickly from a tarmac surface, it will eventually start to pool on the surface. This can cause the tarmac to soften and even buckle in some areas. It’s important to have proper drainage in place before installing a tarmac surface, especially if the area is prone to flooding or has a high-water table. Damaged Steel ReinforcementThe steel reinforcement underneath the tarmac can sometimes become damaged, which will leave small holes and gaps. If this happens, water will get in and soften the surface over time. Heating and Cooling of the TarmacThe temperature fluctuations that occur during the day and night can also affect the stability of a tarmac surface. In hot weather, the tarmac will expand, and in cold weather, it will contract. This can cause small cracks to develop over time, and these cracks will provide a path for water to seep through and soften the surface. Alkali-Silica ReactionAnother problem that can occur with tarmac is called an alkali-silica reaction. This happens when there is a reaction between the silica in the aggregate and the alkalis in the asphalt binder. Over time, this will cause the tarmac to deteriorate and crumble away. Using Tarmac for Other PurposesThere are different grades of tarmac, and not all of them can be used as a surface coat. Some only work as a foundation coat, and some aren’t suitable for heavy-duty use, such as car parks or walkways that get a lot of footfall. If the wrong type is used, it won’t support vehicles or people walking on it, which will cause the surface to break down over time. ConclusionThere are several reasons why your new tarmac drive is still soft even after installation. It’s important to consider all of these factors before installing a tarmac surface to ensure that it will last for as long as possible. For recreational areas, it’s best to invest in a good-quality tarmac to avoid having to repair and resurface it frequently. Now that you have the information to diagnose why your new tarmac drive still soft. While you are here why not read some other blog posts we have to offer including 8 Reasons Why Your Pilot Light Keeps Going Out and another article explaining how to Give Your Stone Or Brick Fireplace A D.I.Y Makeover! 15 Reasons New Tarmac Drive Can Still Be Soft Even After Installation is available on ADetailedPalette “15 Reasons New Tarmac Drive Can Still Be Soft Even After Installation”> via Tumblr 15 Reasons New Tarmac Drive Can Still Be Soft Even After Installation It can be very annoying if the boiler stops working all of a sudden and the pilot light keeps on turning off. You try fixing it by yourself, and it works for a while, then shuts off again and again. It can be very tiring to constantly improve it, especially if it stops working in the middle of the night. However, before you panic and ask for a new boiler, you must first understand why your pilot light keeps going out. You might be surprised that the reason for your problems might not be about you or the other people around you. By the time you finished reading this article, you would soon find out why it always happens and what can be done about it. This article will educate you on everything you need to know about pilot lights going out constantly. Reasons Why Your Pilot Light Keeps Going As mentioned above, there are several reasons why your pilot light keeps on going out. Knowing the actual causes of why it happens can help you determine which type of troubleshooting or other solutions to fix the problem. Remember that if you cannot fix them yourself, always consult a specialist who knows how to fix these problems quickly. Your Thermocouple is FaultyThis is one of the primary reasons why your pilot light keeps going out. The thermocouple is also known as the flame sensor, and it is a safety mechanism that is tasked with shutting the gas if the pilot goes out. Your thermocouple should be functioning correctly. If left neglected, it will cause the gas to enter your house and lead to more dangerous situations, such as fires and explosions. The thermocouple usually fails because it is either dirty, broken, or not lined up correctly. If your thermocouple is filled with soot, it would undoubtedly impact the overall performance of your boiler. Thus, your pilot light keeps on going off. You can contact a professional to fix your thermocouple problems if you are not confident doing it yourself. Consulting a professional who can fix it as soon as possible helps you save your house and your life from further disasters caused by faulty thermocouples. Your Gas Regulator Has Gone BadAnother reason might be your gas regulator. For example, suppose your boiler does not get enough gas for it to function. In that case, it will ultimately cause the pilot light to go off and affect its overall performance. Not only that, but your faulty gas regulator will also affect other appliances in your house that use gas as their source of energy. These include your stove, your dryer, and your furnace. Contact a professional who can solve this problem as soon as possible to avoid any complications or disastrous results. Your Pilot Orifice is FilthyYour thermocouple might not be reached by the flames if the pilot orifice is too dirty to function correctly. For this case, you must disassemble the entire pilot to clean it properly. Then, you can use either a needle or compressed air to clean the pilot orifice. After that, you can assemble it back and test if it works this time. Always keep your pilot orifice clean, and check it every now and then if it requires cleaning of some sort. However, if you are not confident with your skills, some professionals can help you with these clean-up issues. They are usually just a phone call away, and they can address your concerns as soon as possible. A Strong Draft Blows it Out.A strong draft might also be the culprit for your pilot light going off incessantly, especially in the nighttime. Being a natural occurrence, especially during windy days or when you have storms nearby. This is usually caused by a leak that can be found at the output duct of your boiler. Making an ample entrance where the wind enters and knocks the light out of your pilot light. To prevent this from happening, ensure that every air passageways in your house are transparent and open to avoid drafts entering the system and cause its lights to go off unexpectedly. You’re Experiencing Natural Gas FluctuationsThis usually happens when your gas grid receives a lesser supply than the usual. Your boiler is sensitive to gas peaks. The slightest irregularity can enable your boiler pilot lights to go off unexpectedly. This happens in the winter months, where everyone uses their boiler to keep themselves warm inside their homes. Ask your neighbours if they also experience the same problems. Otherwise, contact your energy company to make sure that you are not the one experiencing this. They can recommend a house visit to check your system or notify you that the gas grid receives a lesser supply than usual. Check The Colour of Your Pilot Light The pilot light going off constantly is a problem in itself, but you should also check the colour of your pilot light. If it gives out a yellow or orange light instead of the usual blue, call a professional company immediately, as it can be a sign of a severe problem for your boiler. You must act on it immediately to avoid any accidents or serious injuries you and your family might experience if you neglect to check your pilot lights thoroughly. Our Takeaway The pilot light keeps going out for several reasons, such as dirty orifices, faulty boilers, and other factors. Usually, you can take care of these immediately if you have the right skills and knowledge. It doesn’t take that much effort, aside from disassembling the pilot for cleaning the orifice. However, if you are not confident with your skills, feel free to call a professional company to address the problems. They have all the skills, knowledge, and experience in dealing with these problems to ensure the safety and security of your family. However, never leave it unattended, or you might suffer bitter consequences such as explosions, accidents, and other injuries. Do not endanger your life and your property the moment you see this happening. Now you know the ways to spot and potentially prevent your boiler’s pilot light going out, why not check out some of our other articles regarding your central heating system with our piece on how difficult it is to move a boiler? Or if you have a brick fireplace, check out or article on ways to give your stone or brick fireplace a D.I.Y makeover! 8 Reasons Why Your Pilot Light Keeps Going Out is courtesy of https://adetailedpalette.com/ “8 Reasons Why Your Pilot Light Keeps Going Out”> via Tumblr 8 Reasons Why Your Pilot Light Keeps Going Out Moving a kitchen sink can be a daunting task, but it doesn’t have to be. There are several steps you should take before moving the sink to do so safely and efficiently. How to Move a Kitchen Sink?For those who are sick of their kitchen looking like it stepped off the set of “The Brady Bunch,” you should seriously consider a kitchen renovation. One of the most critical aspects of any kitchen makeover is the location of your kitchen plumbing. Even for the handiest householders, the prospect of cutting and re-routing pipes, soldering copper, drilling holes, and installing a sink and a dishwasher is daunting. Because of technologies like flexible supply lines, PEX water pipe, and push-fit water pipe fittings that don’t require soldering, plumbing has become more accessible throughout the years. When remodelling a kitchen, the most challenging challenges are ensuring that the drain pipe has good pitch and finding space for the vent pipe to be moved. Moving it the Right WayRelocating a kitchen sink might be easy or challenging, depending on how far you’re moving it. If you’re only moving the sink a short distance, you can utilize longer faucet supplies to make up for the lost length in the drain and vent. They are moving the sink across the room, on the other hand, maybe quite tricky. Water lines may be cut and expanded virtually anywhere, even if you have to drill a few holes. Moving the water supply may be made considerably more straightforward by using PEX pipe or push-fit fittings. To find out more about PEX pipes and other types of piping used within the home, read our article on Popular Types of Plumbing Pipes and Their Uses! Drain and vent pipes, on the other hand, are a very different story. When relocating a kitchen sink, the most important thing to remember is to make sure the drain has an adequate amount of pitch. Drain pipes and vents should have a slope of at least ¼ inch per foot. Locating a suitable location for a new vent can be a real challenge. You don’t want a vent pipe going through the centre of the kitchen if there’s a second story above it. To keep them out of sight, remodels will route new vents via an above closet. Do You Need a Plumber?It’s a do-it-yourself job that even the least experienced householders can do. However, if you need to make significant adjustments to the drain and vent, you’re best off leaving it to a professional plumber. It won’t drain well if the sink isn’t properly ventilated or if the drain has a low pitch. To fix this, you’ll have to take down your newly renovated walls, ceilings, and floors and start from scratch. With a slab base, moving kitchen plumbing is next to impossible. It is possible to reroute water lines through walls or ceilings if you use a PEX pipe that is flexible. Due to the drain’s pitch and need to be lower than the fixture, the slab must be cut and hammered to make it work. A plumber would most likely be needed if your property is built on a slab, and you want to renovate your kitchen. What about installing an Island Sink?An island sink is popular among homeowners because of its attractive appearance and adaptability. It is not difficult to connect the water and drain for an island sink. Like those found in most ordinary sinks, the drain and water pipes rise from the bottom of the cabinet and connect to the sink and faucet. You can plumb an island sink if you can plumb a kitchen sink. The vent is the source of the majority of issues with an island sink. A standard kitchen sink vent rises at least 6 inches above the sink before descending to the floor. Because an island sink vent cannot accomplish this, you have just two options for venting an island sink. Install an island vent that rises and loops as high as beneath the cabinet before descending through the floor and connecting to a vertical duct. This will protect your trap from siphoning while providing oxygen to the system. The alternative option is to install an air admittance valve (AAV), a gravity-operated valve that should be positioned as far up in the cabinet as feasible. It is a less complicated option than an island vent, but it cannot always keep up with emptying a large sink or dishwasher, resulting in sluggish drainage. Before installing an island vent or an AAV, verify with your local code enforcement office because the requirements for each might differ from city to city. How about Water Dispenser and Ice Maker?Refrigerators with a filtered-water dispenser and an ice maker are popular, but they don’t produce water on their own. To feed your water dispenser and ice maker, a water line must connect to one of the cold water pipes. This is frequently accomplished by placing a saddle valve on a cold water line closest to and most accessible to your refrigerator. Some saddle valves require a hole to be drilled in the pipe, while others are self-tapping. Alternatively, you may use a push-on-type ice maker connection kit containing a tee and a cut off valve to connect to the cold line. Following the installation of the valve, ¼-inch water tubing is connected to the valve and routed up to a connector on the rear of the refrigerator. Typically, this entails drilling a tiny hole in a cabinet or the floor beneath the refrigerator. The tube is highly flexible and can be composed of copper, polyethylene, or braided stainless steel. Because you can get all of the supplies you need in a kit, this is an excellent project for most DIYers. Final Touch With Dishwasher and Other Kitchen AppliancesA kitchen renovation generally includes new equipment. Though the expense of new appliances may make you believe that your old ones are still functional, new appliances might save you money over time. While most appliances are safe and straightforward to install, you should exercise caution when relocating and installing the gas supply for your stove. Because a gas leak might be dangerous, you should leave this work to the specialists. Installing your new dishwasher’s connections isn’t nearly as complicated. The water and the drain go through the cabinet under the sink. The water is clamped to either a dishwasher connection on the tailpiece or a similar fitting on your trash disposal. To prevent the drain from back flowing into the dishwasher, use an air gap device or put a high loop in the drain line and attach it to the cabinet wall. How Much Does it Cost?Moving a kitchen might cost up to $2000 or more if the process is complicated. Plumber call-out fees can range from $60 to $100, while hourly charges can range from $100 to $150. Now you are equipped with the knowledge on how to move and install your kitchen sink and other appliances, why not give your fireplace a makeover or look into moving your boiler! The article Moving Your Kitchen Sink & Installing Other Appliances Read more on: https://www.adetailedpalette.com/ “Moving Your Kitchen Sink & Installing Other Appliances”> via Tumblr Moving Your Kitchen Sink & Installing Other Appliances If you’re lucky enough to own a stone fireplace in your house - whether it’s functioning or not - you’re already aware of how it can dominate a room; however, it may not be providing the aesthetic look you’re going for and maybe overshadowing the area in the wrong way. If this is the case, it is time for a change! Whether you’re considering a complete overhaul or a weekend do-it-yourself project, be inspired by these affordable, different fireplace makeover ideas. Before You Start: A Brief ReminderFireplaces are not comparable to other types of house furnishings. They can be a fire hazard if not installed, maintained, and updated properly. We strongly advise you against trying any fireplace upgrade job without first researching local fire laws and enlisting the assistance of a competent professional who knows their stuff! If you choose the do-it-yourself route, please ensure that you obtain your upgrade instructions from a credible source-and do not skip any steps. Keeping things safe must be your top consideration! Add an Eye-Catching MantelThis fireplace features a wooden mantel that adds warmth to the space and attracts attention to the room’s focal point, the fireplace. Stylish ScreenEven something as simple as a new fireplace screen can significantly improve the appearance of this vital living room component. Use Contrasting ColoursThis comfortable family room’s fireplace becomes a subtle focal point by painting your stone fireplace surround a similar shade of slate grey. Use Attractive ArtworkThe abstract artwork above the fireplace directs the viewer’s attention to the centre of the room and harmonizes with the other colours found throughout the space. This is a cost-effective remodelling option, subject to the price of the artwork. Black + White PaintsMaintaining a modern and sparse aesthetic does not have to be boring. This elegant living area is highlighted by neutral furnishings, brilliant white walls, and an ebony veneer and matte black granite fireplace. Stunning & Glossy finishYou can finish your stone fireplace using a high-gloss crimson paint that is the ideal complement to the flowery wallpaper in the room. The lustrous polish imparts a more abundant, eye-catching appearance. Paint It!While traditional fireplaces can have stunning features or inscriptions, they tend to seem very unimpressive when the stones are too worn, or the paint is cracked. Please keep the original aspects you adore, but breathe new life into them with a fresh coat of paint. It’s probably the simplest way to revitalize your fireplace and provides an opportunity for more creativity. Tile In styleWe adore the aesthetic of a tiled fireplace, and there are numerous ways to customize your stone tiles to your preferences. If you’re a fan of vibrant hues, go wild! If you’re a fan of cool prints, you’ll appreciate exploring an elegant selection. Alternatively, if you want a more understated, sophisticated style, why do you stick to a monochrome palette and incorporate an unusual pattern? These encaustic cement tiles do all the work for you, and their enormous size makes tiling the space around the fireplace for a sleek, clean look a very simple task. And don’t forget that it doesn’t have to be all about the environment. While this is not the quickest and cheapest do-it-yourself project, it is one of the most efficient. Clean & Sand Your FireplaceYou might be surprised at how much difference cleaning and sanding the stones can make in the appearance of your stone fireplace. Clean the stones with a sponge, water, and light dish soap to remove any built-up filth. If the stones are scuffed, use fine-grit sandpaper to remove the marks carefully. Because this will cause some stones to stand out more than others, you may wish to lightly sand all the fireplace stones to get an even appearance. If there are stones that must be removed immediately, you can chisel out the mortar, slide out the stone, and replace it with a fresh stone. Set the new stone with fresh mortar. Set the new stone with fresh mortar. Constructing A Concrete Facade Over A Stone FacadeWhile having a stone fireplace is desirable, huge stones add unnecessary bulk to most designs. You could resurface a stone fireplace as a viable solution by overlaying the brickwork with concrete to fill in the gaps. Thus, the stone will be concealed, and the fireplace will take on a much finer, smoother appearance. By the way, adopting concrete provides a slew of extra benefits. For example, you can repaint it once it dries to add extra colour to your home. Additionally, adding concrete will give your stone fireplace a crisp and rejuvenated appearance, bringing it into the present era. Finally, it is quite simple to use! Add Concrete To your Stone FacadeStones give your home a lot of weight, which might result in a lot of “business” that most homes don’t require. Concrete (or stucco) can be put directly into stone masonry to fill in any gaps and conceal the stone’s appearance. This will assist in giving it a lovely, smooth appearance. Update Your Stone Fireplace With A Wooden PanelRefinishing your stone fireplace with wood panels might be an excellent and very simple option. This type of renovation is always current, and it also has several advantages. For instance, there are numerous ways to dress up wood panels to achieve the desired aesthetic for your fireplace. White ones will work well for a farmhouse design, while mahogany ones would work well for an antique Cape Cod style. Additionally, panels are ideal for fast removing stone since, unlike concrete, they do not require curing time. Additionally, you will be able to effortlessly hang artwork on them if desired! Do You Desire More Colour? Choose Bright coloured tiles!Are you considering enhancing the colour of your stone fireplace? Then the tile is the answer! It’s extremely easy to install, and you can also choose from a wide choice of colours and patterns. You can completely renovate a stone fireplace on your own and significantly improve the appearance of both the fireplace and the space. Utilize one or more of these affordable stone fireplaces renovating ideas to transform your appearance without breaking the wallet. Now that you have the knowledge on ways to give your fireplace a stylish makeover, why not read our other articles that can inspire your creativity such as rustic furniture? Or on what you should know about distressed furniture! The following post Give Your Stone Or Brick Fireplace A D.I.Y Makeover! is courtesy of A DETAILED PALETTE “Give Your Stone Or Brick Fireplace A D.I.Y Makeover!”> via Tumblr Give Your Stone Or Brick Fireplace A D.I.Y Makeover! When it comes to plumbing, different piping materials are used for different water delivery and drainage systems. In ancient times, the Greeks used clay pipes to deliver water to homes and public buildings. However, in the 20th century, materials such as copper, galvanized steel, and terra-cotta were more preferred. Today, as the understanding of lead poisoning takes shape, different types of pipes’ materials are used for specific purposes. ABS, PVC, and copper pipes are the most common delivery and drainage systems local plumbers use. This guide looks into the main types of plumbing pipes you can use for your home plumbing system. Main Types of Plumbing TypesThere are five main types of plumbing materials including:
Let’s discuss each of these plumbing pipe material and their pros and cons 1. Copper PipesAlthough being one of the ancient materials for plumbing pipes, copper remains a popular option today. It is available in two main types;
Copper pipes come in different sizes and grades of thickness. For sizes, this depends on the diameter, which is expressed in millimetres. The most common sizes are 15mm, 18mm, and 22mm. Bigger pipes go up to 108mm. In terms of grades, there are three grades of copper pipe thickness:
Pros of Copper PipesThe following advantages of copper pipes have enabled them to stand the test of time:
Cons of Copper PipesCopper is not used for all plumbing purposes due to these disadvantages:
Overall, it is the best plumbing material for many purposes. 2. Polyvinyl Chloride (PVC) PipesCommonly known as PVC, Polyvinyl chloride has grown in popularity in the recent past. The material is made from plastic and vinyl combination to form a thermoplastic polymer. Due to their rigid nature, PVC pipes are used to deliver highly pressurized water and drainage. They come in varying thicknesses and configurations, making them versatile. Make sure to check different labels, especially when you are looking for PVC piping to transport drinking water. NSF/ANSI 61 is a known label for drinking water system components. Pros of PVC Pipes
Cons of PVC
3. Chlorinated Polyvinyl Chloride (CPVC)Shortened to CPVC, Chlorinated Polyvinyl Chloride pipes are made using the same basic elements that make up PVC, but the difference is that CPVC is chlorinated, which enables them to withstand temperature differences better. For this reason, CPVC is used for hot lines. Another benefit of CPVC is that they come in the same sizing system as copper piping, make it easier to connect to other pipes at home. Pros of CPVC
Cons of CPVC
4. ABS PipesAcrylonitrile butadiene styrene pipes are similar to PVC pipes, but are easy to identify due to their black colour. They are resilient to cold temperatures and are majorly used for drain and vent lines. They are noisier than other plumbing materials and thus can cause disturbances, making them unsuitable for residential plumbing. Pros of ABS Pipes
Cons of ABS Pipes
5. Galvanized Steel PipesGalvanized piping is what many people think of when it comes to plumbing pipes. They used to be a preferred choice for residential plumbing but not anymore. Due to their issues with longevity and being prone to rust, galvanized steel pipes are no longer installed in homes. If you have them in your home, you should consider replacing them with CPVC or copper pipes. Pros of Galvanized Steel Pipes
Cons of Galvanized Steel Pipes
All these disadvantages and more have made these pipes less preferred material in residential plumbing. ConclusionThere are many types of plumbing pipes, and the above are just the main ones. If you are looking to install a new plumbing system in your home, you need to engage a trusted local plumber so they can help you choose the pipe material that’s best suited for different plumbing needs in your home. The post Popular Types of Plumbing Pipes and Their Uses Read more on: www.adetailedpalette.com “Popular Types of Plumbing Pipes and Their Uses”> via Tumblr Popular Types of Plumbing Pipes and Their Uses There can be a lot of reasons for wanting to relocate your boiler. Maybe it is taking up a lot of space in the kitchen or is located in the bedroom and keeps making too much noise every night, which makes it unable for you to sleep properly. Or maybe you simply decided to switch from the conventional boiler to the combi and would like to change the boiler’s current position. Whatever the reason may be, moving it is definitely doable, but still, how difficult is it to move a boiler? That is exactly what we will be talking about in this article while providing you with all the necessary information you need to keep in mind. How Difficult Is It To Move A Boiler?We asked Ben Race a heating engineer from Newcastle the question above to try and get a more detailed understanding. In short as a rule of thumb, it depends on the new position for the boiler, how long it may take as well as how much it can cost. The Best Place For Putting The BoilerBefore you make a decision regarding where you want to put your boiler in your current home or your custom built home, you have to think carefully; first, you need to consider practicality. After all, moving the boiler is an important task and after finally moving it, you should be well-contented with its new position. For example, how easy is it going to be to access the boiler in case you want to repressurize it? Can the engineer get to it with ease? Take into consideration whether or not it will be practical to install a boiler in your preferred place. For instance, carpet can be hassle-free to take up in order to lay pipework for your new boiler, but in case you have concrete or tiled flooring, pipes may require to be run through the wall or ceiling. This can create a lot of mess and cost too much as well. Secondly, there are certain boiler flue regulations you should consider if you want to move the boiler to another room. According to the regulations, gas condensing boilers require to be positioned a specific distance away from windows and doors. This is the requirement because of a minimum flue clearance distance stating that flue requires to be no less than 1,200 millimeters away from the opening door or window. Also, access to the waste pipe is needed for the boiler, which makes the utility room or bathroom quite a convenient location. However, remember that the larger the distance is between a waste pipe and a boiler, the more pipes are required to connect the two, which can increase the cost. How Much Does Moving A Boiler Cost?There are various costs which are associated with moving the boiler, and the figures provided can be impacted by some additional factors that we did not take into consideration. Each home is different and some relocations can be easier than others. So the figures provided in this article are only an estimate. First, depending on the type, choosing a new boiler can cost from $846 to $2,419. Some other products you may need to purchase for relocation include:
Additionally, there will be a cost of running a condensate pipe from a combi boiler to the waste pipe as well as a cost of making the new hole for a flue. You can consider all these as labor costs only. When you want to replace a boiler with another one in a new location, the total cost can be around $3,205. However, even this may change as it depends on product prices, the difficulty of a relocation, as well as unexpected complications. Keep in mind that the cost may increase when you want to switch from one kind of system to another one. For instance, if you have decided to switch from the conventional system to the combi, it might cost approximately $3,629. How Long Does Moving A Boiler Take?We asked PlumbGuardian this and the next two questions, having had years of experience as plumbers & heating engineers in Middlesbrough it would be wise to get some insight. Once the boiler is moved, pipework also requires to be moved, which can add more cost to a job. It may also demand some extra time as well as additional labor. Usually, moving a new boiler to another location takes one-two days. However, if any complications arise, it can take longer than that. Can You Put The Boiler In A Loft?A lot of people opt for moving the boiler into the loft. If you also plan to do the same, keep in mind that you will have to alter a loft space to accommodate a boiler. This may include boarding out a loft, fitting a boiler with frost protection, making sure that a wall can hold the boiler’s weight, and ensuring that you have the loft ladder installed. Also, remember that when the boiler is situated in a loft, it usually takes quite a long time until hot water reaches the downstairs taps, which may result in wasted energy and water. After moving the boiler, you should fit the carbon monoxide alarm. Additionally, pay attention to the pressure of the newly located boiler. It may take some time until a system settles into its new position. In the first days, it may require repressurizing as well. Some Considerations For Moving The Boiler
Bottom LineAs you can see, the difficulty of moving the boiler to a completely new location depends on a variety of factors. Before choosing its new location, make sure to take all these factors into consideration so that you won’t have any regrets after moving it and will be happy with its brand new location.
How difficult is it to move a boiler Read more on: www.adetailedpalette.com “How difficult is it to move a boiler”> via Tumblr How difficult is it to move a boiler What is a cob house?Welcome. Today we will learn about a cobb house or a Clom house (Welsh). This is a natural building material that has been here for years, spanning many places, continents and time periods. Cob is a natural building material that is made from soil or clay, straw and water. It can also have some lime in it, and some people also use sand. You will be able to find cob house plans online as well as specialist cob house builders for the task ahead. What is cob made from?What is a cob house made of? Cobb is made from subsoil (clay), sand and water. There is a specific ratio of these ingredients which could also depend on the quality of the ingredients, and the amount you have at a certain time, so the good thing is that you can always add more, or take some away if you have too much. What does the word Cob mean?The first use of the word Cob has been traced to around 1600’s england. The generally agreed meaning is to ‘beat’ or ‘strike’, this would be attested to the way the materials are mixed together - often by using the feet to stamp it together and mix it. Of course the first cob homes were created long before this, possibly 11th century or older. Where can build a cob house?If you own the land you are wanting to build the cob house on, it is very likely you will be able to build a cob house on it. You may have to get planning permission from some places. The good thing about a cob house is that if you have any eco based building regulations, because of the nature of this building material it often passes planning with flying colours because it is so carbon friendly, and even carbon capturing. Where to build a cob home is often a hard decision to make Where are cob homes used most?The earliest examples of cob homes are in Afghanistan and warmer cooler countries, this is because they provide a lot of cool air within them, so it is well ventilated. How to make a cob houseGenerally to make a cob house, you need a foundation made out of wood, and then you can fill in this space with your cob mixture. This will dry incredibly strong and be very effective in the making of a brilliant home. Check out clarksandersdesignbuild.com for more info You can also use stones to make the wall structure, and then fill it in with the cob. In England, there is a lot of chalk in the soil, so this gives the cob a white chalky look, and is sometimes called wychert. How long does it take to build a cob house?Building a cob house could take longer than building a regular house because you need to mix the ingredients yourself, but the reality is, sand and cement also need mixing and bricks need precise measuring, so the time kind of evens out and it ends up not taking much longer than a regular house with bricks. How to build a cob house?Learn here how to build a cob house if you do not want to find a cob house for sale. How to build a cob house instructions are hard to find so I will be showing you how to build a cob house step by step. Cob house how to:
You may be able to find out how to build a cob house step by step pdf. How to build a cob house foundation?You do need a strong foundation in order to build a good cob house, check out this video for how to build a modern cob foundation. https://www.youtube.com/watch?v=ZEWuJKV3rhA Benefits of a Cob house?Interestingly there are so many benefits of having a cob house. This time honoured method of building really speaks for itself in the amount of positive uses it has - let’s go through a few of them now:
How long does a cob house lastThe oldest cob house is 10000 years old. Hopefully this can give you an idea opf how long they can last if well looked after! This will be reliant on if the roof is maintained properly and the general property maintained well, and is patched when necessary. Modern cob houses will also last this long if maintained because the materials have not changed over this time. Although made of soil and water and straw, cob does not wash away once it is set. Think of it like brick in its material type. How to weatherproof a cob homeUsing lime plaster will waterproof your home, as well as being a natural material it is also breathable and lets the air in and out which means it will reduce dampness. How to add cob to my home that has sidingThe lime would waterproof it, as well as this it has an overlapping roof which will protect from the most rain. Where to build a cob home in the usIf you own the land in the US you can build a cob home on your land as long as you get permission and have a good place to build. Cob house uk is a similar process. How to use the earth to cool a cob homeA cob home is a naturally heated and cooled place. In the summer, the walls will store an amount of heat, and not let any more through. Because the walls are often 60cm+ thick this is also beneficial at keeping the heat in or out. How much to build a cob houseA house on the small side would set you back around 20 to $50000 dollars, this is for a smaller hobby style home that is still liveable. The price ranges because you may want to do this all yourself, or get people in to help. It is really up to you and your level of confidence with this. Cob house Cost is very dependent on your materials, experience and size of house. Cob house for sale range a lot considering that they are in all parts of the world, spanning the globe. So there is not really one price that i can quote because there is not just one! Cob house grand designsYou may have seen on grand designs a magnificent looking cob house. It retails at around Cob house cost £1million points, and we can see why. It is full of magnificent features including a living roof, plenty of windows and solar panels which really accentuates the fact it is great for the environment. The blog post What is a cob house? was first published on A DETAILED PALETTE “What is a cob house?”> via Tumblr What is a cob house? |